- Home
- Products
- Material Testing Machines
- Torsion Testing Machine
Description
Torsion Testing Machine is designed for conducting Torsion and Twist on various metal wires, tubes, sheet materials, torque measurement is by pendulum dynamometer system. Autographic recorder gives the relation between torque and angle of twist.
Application
Features
- Suitable for Torsion and twist on various metal rods metal and flats
- Torque measurement by Pendulum Dynamometer system.
- Auto torque selector to adjust torque to specimen through gear box.
- Autographic Recorder for relation between torque and angle of twist.
- Accuracy ± 1% of the true torque
Specifications
| Specifications | Model No. | ||||
| BTT-100-NM | BTT-200-NM | BTT-500-NM | BTT-1000-NM | BTT-2000-NM | |
| Max. Torque capacity (NM) | 100 | 200 | 500 | 1000 | 2000 |
| Torque Ranges (NM) | 100,50,20 | 200,150,50 | 500,250,100,50 | 1000,500,250,100 | 2000,1000,500,200 |
| No. of Divisions on dial | 500 | 500 | 500 | 500 | 500 |
| Torsion speed & directions | 1.5 RPM | 1.5 RPM | 1.5 RPM | 1.5 RPM | 1.5 RPM |
| Distance between grips (mm) | 0-400 | 0-450 | 0-500 | 0-600 | 0-1000 |
| Grips for round bar of dia (mm) | 4-8 8-12 |
7-10 10-15 15-20 |
10-17 17-24 24-30 |
10-18 18-26 26-34 |
20-30 30-40 40-50 |
| Grips for flat bars (mm) width |
2-8 25 |
3-10 30 |
5-12 40 |
5-15 50 |
10-20 60 |
| Motor HP (3 ph 440V, 50Hz, AC) | 0.5 | 0.5 | 1.5 | 2.5 | 3.5 |
Accessories
Software Description
Download Cataloge
ENQUIRY
Analogue Torsion Testing Machine
Description
Torsion Testing Machine is designed for conducting Torsion and Twist on various metal wires, tubes, sheet materials, torque measurement is by pendulum dynamometer system. Autographic recorder gives the relation between torque and angle of twist.
Application
Features
- Suitable for Torsion and Twist tests on various meta rods and flats.
- Torque measurement by Torque cell & angle of twist on LCS display provided on Data Acquisition System.
- Torque resolution 0.01% of machine capacity for entire range.
- Angle of twist resolution is 0.1 degree.
- Accuracy of Torque measurement ± 1% in the range from 4% to 100% of machine capacity.
- Provisions to conduct test slowly by a handle which facilities finding Moduls of rigidity “G”.
- Facility for connecting to the computer
- Various models maximum Torque capacity from 100 NM to 3000NM.
- Machine meet the requirement of IS : 5075 1969
Specifications
| Specifications | Model No. | ||||
| BTT-100-NM-D | BTT-200-NM-D | BTT-500-NM-D | BTT-1000-NM-D | BTT-2000-NM-D | |
| Max. Torque capacity (NM) | 100 | 200 | 500 | 1000 | 2000 |
| Torque Ranges (NM) | 0-100 | 0-200 | 0-500 | 0-1000 | 0-2000 |
| No. of Divisions on dial | 500 | 500 | 500 | 500 | 500 |
| Torsion speed & directions | 1.5 Reverse | 1.5 Reverse | 1.5 Reverse | 1.5 Reverse | 1.5 Reverse |
| Distance between grips (mm) | 0-400 | 0-450 | 0-500 | 0-600 | 0-1000 |
| Grips for round bar of dia (mm) | 4-8 8-12 |
7-10 10-15 15-20 |
10-17 17-24 24-30 |
10-18 18-26 26-34 |
20-30 30-40 40-50 |
| Grips for flat bars (mm) width |
2-8 25 |
3-10 30 |
5-12 40 |
5-15 50 |
10-20 60 |
| Motor HP (3 ph 440V, 50Hz, AC) | 0.5 | 0.5 | 1.5 | 2.5 | 3.5 |
Accessories
Software Description
Download Cataloge
ENQUIRY
Digital Torsion Testing Machine
Description
BDT series metallic materials wire wrapping testing machine used for determining the ability of wire of diameter or thickness 0,1 to 10 mm inclusive to undergo plastic deformation during wrapping. The test consists of winding a wire to a specified number of turns around a mandrel of the diameter specified in the relevant standard to form a closely wrapped helix. It may also include a specified sequence of windings and unwindings, or even rewindings. With the dynamic torsion encoder to measure the torqure when wrapping the wire.
Application
Features
Can use 1:1 mandrel.
In ISO 7802, clause 3: A piece of the wire to be tested maybe used as the mandrel, provided it is of the specified mandrel diameter and of sufficient hardness.
2, with safety cover.
Standard: ISO 7802: Metallic materials.
Specifications
| Model No. | BDT-10M |
| For Wrapping Test | |
| Bending diameter | 1-10mm |
| Wrapping speed | Random setting, 20r/min, 30r/min, max. 60r/min |
| Mass Weight | 20N, 50N |
| Standard mandrel | 4, 6, 8, 10mm |
| For torsion test | |
| Specimen diameter range | 0.3-3mm; 3-10mm |
| Rotate speed (for steel/aluminum) | 0.1~2 (Number of turns per S) / 1 ~ 120 Rpm |
|
Rotate speed (for copper) (optional with extra cost) |
0.1~5 (Number of turns per S) / 1 ~ 300 Rpm |
| Moving guide rail parallelism | ?0.2mm |
| Distance between two jaws | 500mm |
| Chuck hardness | 55?65 HRC |
| Max. count circles | 999999 |
| Turning direction | Both directions |
| Power | 220V, 50HZ, 1 phase |
| Dimensions | 1400×370×1100mm |
| Weight | 250Kg |
Accessories
| Mainframe | 1 set |
| Moving guide rail | 1 set |
| Motor | 1 set |
| Dynamic torsion encoder | 1 set |
| Display system | 1 set |
| Standard mandrel (4, 6, 8, 10mm) | Each 1 pc |
| Chuck for torsion test (0.3~3mm, 3-10mm) | 1 set |
| Torsion test fixture | 1 set |
| Wrapping fixture | 1 set |
| Documents (Manual, packing list, certificate) | 1 set |
Software Description
Download Cataloge
ENQUIRY
Digital Torsion and Wrapping Testing Machine